To celebrate its partnership with Alinghi Red Bull Racing, TUDOR is unveiling two brand new Pelagos FXD models: a chronograph and a time-only watch inspired by yacht racing. With cases made from carbon composite, titanium, and stainless steel and fitted with manufacture calibres, these watches embody the daring spirit that is needed to be a contender in the most competitive yacht race in history.
TUDOR Pelagos FXD Chrono
M25807KN-0001
EUR 5'340
The Pelagos FXD “Alinghi Red Bull Racing Edition” models come with several firsts for TUDOR, that go beyond just the watches. A long-term partnership between TUDOR and Alinghi Red Bull Racing was launched in 2022, the first time TUDOR ventured into the world of competitive yacht racing. In this centuries-old sport, victory comes by fusing a resolutely daring human spirit with the most cutting-edge technology. The watches were born out of this philosophy, by combining a high-tech carbon composite, a first for TUDOR, with titanium and stainless steel, just like on an AC75 (America’s Cup 75) hydrofoil racing yacht. It’s also the first time TUDOR has integrated a chronograph Calibre into a fixed strap-bars case.
The daring and innovative spirit of TUDOR is on full display when it comes to the two new Pelagos FXD and Pelagos FXD Chrono models. The watches are imbued with the spirit of TUDOR and Alinghi Red Bull Racing; two separate entities that share the vision of pushing traditional boundaries.
The Alinghi Red Bull Racing AC75 represents the very best in cutting-edge maritime engineering, utilizing a proprietary blend of carbon, titanium and stainless steel to give shape to a hull that leaps out of the water at speed. The same pursuit of technical mastery is applied to the Pelagos FXD models, which similarly combine a high-tech carbon composite for the case and bezel insert, an extremely light and robust material, with titanium for the bezel, crown and direct-action pushers and 316L stainless steel for the case back and movement container. Using the 200-meter water-resistant FXD case design, characterized by its fixed strap bars and initially developed with French navy combat divers, these models both come with a bidirectional 120-notch rotatable bezel that utilizes Swiss Super-LumiNova® Grade X1, a luminous material showing a performance increase of up to 60% after two hours compared to standard grades. These bezels are graduated from 60 to 0, so as to allow for easy tracking of countdowns, a key moment before the start of a regatta. The above package results in distinctive, high-tech mechanical sports watches with the Alinghi Red Bull Racing logo engraved on the case back to further enhance the collaboration.
The single-piece fabric strap is one of the hallmarks of TUDOR, which in 2010, became one of the first watchmaking brands to offer it with its watches. Woven in France on 19th century Jacquard looms by the Julien Faure company in the St-Etienne region, its manufacturing quality, robustness and comfort on the wrist are unique. For the Pelagos FXD models, a highly technical strap construction was developed by TUDOR and Julien Faure. Made up of a 22 mm “Team Blue” jacquard-woven ribbon with red accents and a titanium “D” buckle with a self-gripping fastening system, it adapts to different wrist sizes and is very comfortable to wear.
The Manufacture Calibre MT5602, which powers the Pelagos FXD, displays hour, minute and seconds functions. It offers the signature look and feel of TUDOR Manufacture Calibres. Its rotor in tungsten monobloc is openwork and its bridges and mainplate have alternate sand-blasted and polished surfaces topped with laser decorations.
Its build is designed to ensure robustness and precision. To do this, the variable inertia balance wheel is maintained by a sturdy traversing bridge with two-point anchoring. This system, together with its non-magnetic silicon hairspring, means the Manufacture Calibre MT5602 is both certified by the COSC and able to function beyond the specification of that standard, that is within a tolerance range of 6 seconds (-2/+4) per day, always tested on every single fully assembled watch.
Another notable feature is that the power reserve of the Manufacture Calibre MT5602 is “weekend-proof”; it enables the wearer to take the watch off on a Friday evening and put it back on again on Monday morning without having to wind it. Even if you need a weekend away, your watch does not.
The Manufacture Calibre MT5813, powering the Pelagos FXD Chrono, displays hours, minutes, seconds, chronograph and date functions. It also bears the matte finish typical of TUDOR Manufacture Calibres and comes complete with a signature tungsten openwork monobloc rotor.
Boasting a “weekend-proof” 70-hour power reserve and a silicon balance spring, the Manufacture Chronograph Calibre MT5813 is certified by the Swiss Official Chronometer Testing Institute (COSC), with its performance exceeding the standards set by this independent institute at -2 and +4 seconds’ variation per day, tested on every fully assembled chronograph. A high-performance movement, it was crafted in the purest watchmaking tradition, with a column wheel mechanism and vertical clutch. In keeping with the TUDOR philosophy of quality, it presents extraordinary robustness and reliability, guaranteed by the array of extreme tests applied to all TUDOR products.
Derived from the Manufacture Calibre Breitling 01 chronograph, with a high-precision regulating organ developed by TUDOR and exclusive finishes, this movement is the result of a lasting collaboration between the two brands.
Every TUDOR watch, including the Black Bay, is assembled and fully tested to TUDOR’s superior standards at the new TUDOR Manufacture located in the Le Locle, Switzerland.
This new state-of-the-art facility, bringing together the know-how of watchmakers with the best in production management and automated testing systems, was completed in 2021 after three years of construction. All decked out in TUDOR red, the Manufacture spans over four levels totaling more than 5,500 square meters and is physically and visually connected to the neighboring Kenissi Manufacture, the TUDOR movement production facility founded in 2016.
With Kenissi and a network of TUDOR-owned affiliates, the brand has been able to integrate the development and production of high-performance mechanical calibers. As a consequence, TUDOR now fully masters the manufacturing of strategic components and can guarantee their quality.
42mm black carbon composite case with matte finish and Alinghi Red Bull Racing logo engraved on the case back (25707KN)
43mm black carbon composite case with matte finish and Alinghi Red Bull Racing logo engraved on the case back (25807KN)
60-minute bidirectional bezel in titanium with matte black carbon composite insert, 120-click
Titanium screw-down crown with the TUDOR shield in relief
Titanium, direct-action (25807KN)
Blue, matte (25707KN)
Blue, matte, red accents on the chronograph counters (25807KN)
Flat sapphire crystal
Waterproof to 200m (660 ft)
Single-piece blue fabric strap
Manufacture Calibre MT5400 (COSC)
Self-winding mechanical movement with bidirectional rotor system (25707KN)
Manufacture Calibre MT5813 with chronograph function
Self-winding mechanical chronograph movement with bidirectional rotor system (25807KN)
Approximately 70 hours
Swiss chronometer officially certified by COSC
(Swiss Official Chronometer Testing Institute)
Centre hour, minute and seconds hands
Stop-seconds for precise time setting (25707KN)
Hour and minute hands at the centre
Chronograph seconds at the centre
Chronograph 45-minute counter at 3 o'clock
Small seconds hand at 9 o’clock
Instantaneous date at 6 o'clock with rapid adjustment without non-correction range
Stop-seconds for precise time setting (25807KN)
Variable inertia balance, micro-adjustment by screw
Non-magnetic silicon balance spring
Frequency: 28,800 beats/hour (4 Hz)
31.8mm (25707KN)
30.4mm (25807KN)
6.5mm (25707KN)
7.23mm (25807KN)
25 jewels (25707KN)
41 jewels (25807KN)